Description
Complete* Kicker Amplifier and Subwoofer Bundles
*for factory radio compatibility, please contact us about line output converters
Kicker 44L7S124 (x2) 12″ Solo-Baric L7S subwoofer with dual 4-ohm voice coils + Kicker 46CXA18001T Mono Amplifier + Kicker 46CXARCT Bass Knob + 4 Gauge Amplifier Wiring Kit + 17 feet 2-Channel RCA Cable – Amplifier and Subwoofer Bundle
Subwoofer Highlights
The Solo-Baric revolves around KICKER’s most advanced cone design, the injection-molded SoloKon™. The 360-degree, constant-contact back bracing adheres directly to every contour of the square cone, adding targeted strength, reliable performance and accurate response for the super-clean bass you’ve been looking for.
Subwoofer Features
- Dual Four-Ohm Voice Coils
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon™ 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
Subwoofer Specifications
| Sensitivity | 86.9 dB at 1 watt |
| Frequency Response | 20 – 100 Hz |
| Max RMS Power Handling | 350 – 750 watts RMS |
| Peak Power Handling | 1500 Watts |
| Mounting Depth | 6 ¹³⁄₁₆ inches |
| Sealed Box Volume | 1.25-2.0 cubic feet |
| Ported Box Volume | 1.75-3.25 cubic feet |
Amplifier Highlights
The CXA1800.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class-D power plant and FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller.
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
Amplifier Specifications
| Power (watts/ch) 4 Ohm | 900×1 |
| Power (watts/ch) 2 Ohm | 1800×1 |
| Power (watts/ch) 1 Ohm | 1800×1 +/-10% |
| Frequency Response (Hz) | 25-200Hz |
| Input Sensitivity | 250mV-10V (Low Level) 1V-40V (High Level) |
| Signal-to-Noise Ratio | 95dB |
| Active Crossover | Variable Lo-pass 50Hz–200Hz, 12dB/octave |
| Subsonic Filter | 25Hz @24dB/octave |
| KickEQ™ Boost | Variable 0-6dB @40Hz |
46CXARC Bass Knob
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with select CX and PX KICKER amplifiers equipped with a REMOTE BASS jack on its end.
M2KIT4B 4 Gauge Wiring Kit
- 18.5ft 4AWG Power Cable with 6ft Braided Sleeve and Ring Terminal
- 3ft. 4AWG Ground Cable with Double Strength Terminal
- 19ft Remote Turn-on Wire
- (1) Mini- ANL Fuse Block
- (1) 60A Mini-ANL Fuse
- (1) Firewall Grommet
- (2) 4GA Spade Terminals
- (1) Remote Spade Terminal
- (1) Remote Butt Connector
- (2) Fuse Block Mounting Screws
- (2) Self-Tapping Screws
- (6) Cable Ties
M117 17 feet 2-Channel RCA Cable
- 17 ft RCA Cable.
- Coaxial construction.
- Flux Tinned OFC Wires.
- Split-tip Center Pin and Segmented Shield.
- Micro Barrel Design.
- Frosted Outer Jacket.
Explore more from our collection.
Reviews
There are no reviews yet.