Description
Kicker 48DCWR122 CompR 12″ Dual Loaded Subwoofer in Vented Enclosure + Kicker 46CXA12001T – 1200-watt Mono Class D Subwoofer Amplifier + Kicker 46CXARC Bass Knob + 4 Gauge Amplifier Wiring Kit + 17 feet 2-Channel RCA Cable – Amplifier and Subwoofer Bundle
Subwoofer Highlights
- Double-Stacked Magnet and Large Surround
- Thick, Embroidered Black Carpet
- Front Venting for Smooth, Powerful Bass
- Increased Enclosure Volume for More Output and Deeper Bass on Single 12″ Model
- Pre-Wired, Spring-Loaded, Two-Ohm Terminals
- Front Venting Smooth Powerful Bass
- Extensive Internal Bracing and Thick MDF Construction
WHAT MAKES IT SUPERIOR?
-New and Improved – True Subwoofer Performance from a Thin Driver
-Features Forced-Air Cooling™ – 20% Cooler for Increased Reliability
-Legendary Kicker Bass in a Thin Subwoofer
Subwoofer Specifications
| Woofers [in, cm] | 2 Woofers 12, 30 |
| Impedance [Ohms] | 2 Ohms |
| Rec. Amp Power [watts RMS] | 1000 |
| Peak Power Handling [watts] | 2000 |
| Enclosure Depth [in, cm] | 17-1/4, 43.8 |
| Enclosure Depth [in, cm] | 16, 40.6 |
| Enclosure Depth [in, cm] | 32-3/8/ 82.2 |
Amplifier Highlights
- Mono subwoofer amplifier
- 600 watts RMS x 1 at 4 ohms (1200 watts RMS x 1 at 2 ohms)
- 1200 watts RMS +/-10% x 1 at 1 ohm
- CTA-2006 compliant
- Class D amp technology
- Frequency response: 25-200 Hz
- Variable low-pass filter (50-200 Hz, 12 dB/octave)
- Fixed subsonic filter (25 Hz, 24 dB/octave)
- Variable bass boost (0-6 dB at 40 Hz)
Amplifier Features
- Preamp inputs and outputs
- Speaker-level inputs (speaker wire to RCA adapters required)
- Optional remote bass level controller available
- 3-second delay for turn-on and turn-off
- Includes hardware for vertical mounting
- Wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and a 150-amp fuse recommended
Amplifier Specifications
| Amplifier Class | D |
| Low-Pass Crossover Frequency | 50-200 Hz |
| Low-Pass Slope (dB/octave) | 12 dB/octave |
| High-Pass Crossover Frequency | N/A |
| High-Pass Slope (dB/octave) | N/A |
| Bass Boost | 0-6 dB |
| Bass Boost Frequency | 40 Hz |
| Fan Cooled | No |
| Fuse Rating | 100 |
| Speaker Level Inputs | RCA |
| Preamp Outputs | 1 pair |
46CXARC Bass Knob
Customize your bass, right from your front seat.
The CXARC is a remote bass controller, compatible with select CX and PX KICKER amplifiers equipped with a REMOTE BASS jack on its end.
M2KIT4B 4 Gauge Wiring Kit
- 18.5ft 4AWG Power Cable with 6ft Braided Sleeve and Ring Terminal
- 3ft. 4AWG Ground Cable with Double Strength Terminal
- 19ft Remote Turn-on Wire
- (1) Mini- ANL Fuse Block
- (1) 60A Mini-ANL Fuse
- (1) Firewall Grommet
- (2) 4GA Spade Terminals
- (1) Remote Spade Terminal
- (1) Remote Butt Connector
- (2) Fuse Block Mounting Screws
- (2) Self-Tapping Screws
- (6) Cable Ties
17 feet 2-Channel RCA Cable
- 17 ft RCA Cable.
- Coaxial construction.
- Flux Tinned OFC Wires.
- Split-tip Center Pin and Segmented Shield.
- Micro Barrel Design.
- Frosted Outer Jacket.
Explore more from our collection.
Reviews
There are no reviews yet.