Description
Kicker 48KMA600.4 4-Chanel Marine Amplifier + 45KM654L x2 6.5″ Pairs Marine Speakers + FREE Kicker 41KMLC LED Lighting Remote
Amp Highlights
- 4-channel marine amplifier
- 75 watts RMS x 4 at 4 ohms (150 watts RMS x 4 at 2 ohms)
- 300 watts RMS x 2 bridged at 4 ohms (4-ohm stable when bridged)
- Class D amp technology
- Variable high- and low-pass filters (50-200 Hz, 12 dB/octave)
- Variable bass boost (0-6 dB at 40 Hz) on all channels
Amp Features
- Conformal-coated circuit board helps prevent corrosion
- Marine-grade speaker terminals and ABYC/NMMA-compliant power connections
- Fader switch eliminates need for Y-cords for input signals
- Stainless-steel hardware
- Preamp and speaker-level inputs (speaker wire to RCA adapters required for speaker-level input)
- Wiring, fuse, and hardware not included with amplifier
- 4-gauge power and ground leads and a 60-amp fuse recommended
- Dimensions: 12-7/16″W x 2-1/4″H x 6-5/8″D
- Warranty: 2 years
| RMS Power Output (Watts x Channels) | 75 x 4 |
| Frequency Response at Rated RMS Power | 10Hz-20k Hz |
| THD at Rated RMS Power | — |
| Signal to Noise Ratio | 75 dB |
| Input Voltage | N/A |
| Peak Power Output (Watts x Channels) | — |
| Power at 2 Ohms (Watts x Channels) | 150 x 4 |
| Bridged Power (Watts x Channels) | 300 x 2 |
| Minimum Impedance Bridged | 4 |
| Minimum Impedance Unbridged | 2 |
Amp Specifications
| Amplifier Class | D |
| Low-Pass Crossover Frequency | 50-200Hz |
| Low-Pass Slope (dB/octave) | 12dB/octave |
| High-Pass Crossover Frequency | 50-200Hz |
| High-Pass Slope (dB/octave) | 12dB/octave |
| Bass Boost | 0-6dB |
| Bass Boost Frequency | 40Hz |
| Fan Cooled | No |
| Fuse Rating | 80 |
| Speaker Level Inputs | Yes |
| Preamp Outputs | No |
| Height (inches) | 2-1/4 |
| Width (inches) | 12-1/2 |
| Depth (inches) | 6-5/8 |
| Parts Warranty | 2 Years |
| Labor Warranty | 2 Years |
Speaker Highlights
These speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene® surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
- Four-Ohm Voice Coil
- 3/4-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene® Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- 316L Stainless Mounting Hardware Included
- White and Charcoal Grilles With Seven-Color LED System Included*
- Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***
**ASTM B117 200 hr. Salt Fog Test
***ASTM G154 400 hr. Accelerated UV Test
*Upgradable to 20 Colors and 19 Lighting Modes with KMLC
Speaker Features
| Speaker Size | 6 ½ |
| Design | 2-way |
| Tweeter Design | ¾” Dome |
| Tweeter Composition | Titanium |
| Woofer Composition | Polypropylene |
| Woofer Surround | Santoprene Rubber |
Speaker Specifications
| Woofer (in, mm) | 6 ½, 165 |
| Tweeter (in, mm) | ¾, 20 |
| Sensitivity | 90 dB at 1 watt |
| Frequency Response | 35 – 21k Hz |
| Max RMS Power Handling (Watts RMS) | 65 |
| Peak Power Handling (Watts) | 195 |
| Impedance (Ohms) | 4 Ω |
| Top-mount Depth (in) | 2 ⅜ |
| Mounting Depth (in, mm) | 2 ⅞, 72 |
| Cutout Diameter or Length (in, mm) | 5 ⅛, 130 |
| LED Lighting | Yes |
| Grilles | Charcoal and White |
41KMLC Highlights
- For Use with Kicker Marine Coaxials and Subwoofers
- Provides Multi-Function Control of LED Lighting
- Ultra Slim Remote
- 19 Dynamic Modes
- Multi-function control of LED lighting for a customized look
- Manages 20 bright colors for frequent changes
- 19 dynamic modes including:
- Brightness control
- Adjustable fade
- Speed/strobe adjust
- Auto save
- Provides ultimate control over boating aesthetics
- Ultra slim remote design
- Up to 12 speakers can be used with a single RF receiver
- Authorized Internet Dealer
- 1-year Manufacturer’s Warranty
Explore more from our collection.
Reviews
There are no reviews yet.